At this point in time, we do not have a specific blog built up for the Ford Everest but as they run off the same platform as the Ford Ranger, a lot of the upgrades and brackets are cross-compatible between the 2 models.
LED Headlights Upgrades
We have all of our available LED upgrades available through our vehicle selector below:
LED Conversions to suit Ford Everest
Ford Ranger/Everest Piggy Back Adaptor
New to our ever-expanding range of vehicle-specific piggy back adaptors is the ford adaptor. To avoid any drilling through dust caps or removing dust caps altogether, the Ford Ranger/Everest piggy back adaptor will remove any hassle during install and leave the headlight unit unscathed from the operation.
Ford Ranger / Everest Piggy Back Adaptor
Below is an overlayed diagram to help visualize the plug installation position.
1. Connection to the vehicle's main power supply for the headlight unit.
2. Plugs directly into the back of the headlight unit.
3. Connects to the T-Connector on the STEDI Harness.
Ford Ranger/Everest Lower Grille Bracket
We offer a lower grille mount suitable for PXII Rangers & the Everest models. With installation quite simple & a seamless finish to maintain the OEM appearance to the car. Note there are a few extra steps required for the Everest but either way, we run through both installation processes in the above blog post.
Ford Ranger / Everest Lower Grille Bracket
Ford Ranger/Raptor/Everest Switch Fascia
The Ford Ranger, Ranger Raptor and, Everest (2015-current) present limitation for switches when you are using additional accessories whether it be auxiliary driving lights, winches, and so on. We now offer our switch fascia which is compatible with the above-listed models that will offer the ability to run 4 of our square type push button switches. OEM like fitment and under 1 minute for installation of the panel itself.
Comments
0 comments
Please sign in to leave a comment.