The H4 collar found on our current generation Copper Head LEDs is adjustable. To ensure that the beam pattern is accurate, it is essential that the LEDs and reflector cup are orientated correctly.
The LEDs should be facing east and west, with the reflector cup reflecting light to the top of the reflector as shown at 0.39sec in the video below.
Once correctly aligned, the beam pattern should look like the following picture.
PRO TIP: We recommend installing our LED kit to one headlamp first leaving the alternate side with the standard bulb. Once fitted, turn on the headlamps on whilst roughly 1m meter away from a wall, and check the overall beam pattern of the LED side exactly matches the alternate side. The overall light distribution should resembler the above pattern.
Comments
0 comments
Please sign in to leave a comment.