If you're in the market for some driving lights, just looking to upgrade or even already have a set, this post covers everything from comparing it
TYPE X COMPARISON | ALLAN WHITING DRIVING FOOTAGE
Allan Whiting from Outback Travel Australia recently reviewed a pair of our Type-X LED Driving Lights, so we asked if it was a possibility to use his review plus a small handful of competitor reviews to throw together an unbiased video showing how the Type-X LED Driving Light shapes up against some of the other driving lights on the market.
These videos were all captured in the same environment on the same vehicle with the same camera set up. The original footage can be viewed on the Outback Travel Australia YouTube channel : https://www.youtube.com/user/outbacktravelaust.
We will be running a small series of comparison videos with the Type-X and others in our range against other competitor lights. Leave a comment below on which lights you would like to see in the next installation to the series.
STEDI TYPE X 8.5 INCH LED DRIVING LIGHTS
Straight out of the box you will receive all of the required mounting hardware included all nuts & bolts, washers, side clips, anti vibation dampeners and the u-bracket.
First up is the nuts that will slot into the back of the housing, you will notice there are 2 slots either side of light. The inner side will fit the larger nut and outer fits the smaller nut with the top side of the nut facing towards the centre of the light. Lastly for this step, attach the clips over each side to secure the nuts in place when adding the bolts.
Next up are the side bolts, these only need to be moderately tight at this stage as you will need to adjust the tilt angle when you move on to the install on to your vehicle. Now for the question that everyone asks, "what are the rubber plates for?". These are supplied to absorb vibration whilst driving that if not controlled, can shorten the life span of your lights. For customers using only one mounting bolt, we recommend the dampener plates being used as a must. With only a single point of mounting the lights are much more susceptible to vibration. To install the dampeners place one on the top and one on the bottom of the u-bracket with the rubber side facing in towards the bracket as per the third picture below.
DIMENSIONS & LUX CHARTS
ANTI THEFT KIT | TYPE X
Our Anti-Theft installation guide is still under construction. For the mean time the Type X Anti-Theft Kit is completely 1 size fits all (8.5 inch & 7 inch) Type X Lights
TYPE X ACCESSORIES | COVERS
Since its release, we have had an overwhelming amount of requests for specialty covers that perform more to specific characteristics of the driving conitions you may be facing. We also offer our custom and very pouplar Smiley Cover compatible with our 8.5 inch models as well as replacement STEDI and Clear covers that came with the Type X itself.
AMBER: Excellent for off-road & beach driving, helps in cutting through dust and haze. Coloured filters also reduce the intensity of the light, which is advantages in dense scrub.
BLUE: Helps to reduce glare. Also useful for marine application to reduce glare from water. Useful when driving in snow.
GREEN: Green light offers better defition of outlines. The human eye is most sensitive to green light, it's the brightest of all the colours but this also makes it easier for others to see you. Green is invisible to wild animals. Green light also does not attract insects like white or yellow light does.
WICKED SMILEY: Significantly increases street credibility.
CUSTOMER KIT UPS