Nissan switch wiring instructions

Depending on the platform you are viewing this on the text may not be 100% visible so we will list instructions below.

Nissan Navara NP300 push switches (OLD SWITCH)

1 - Black. Earth / Ground (earth on harness)

2 - Red. Connect to 12v power supply (high beam on harness)

3 - Red. Connected to relay pin 86. This is your power out when the switch is on (relay on harness)

Nissan Navara NP300 push switches (NEW SWITCH)

Nissan Navara Pathfinder push switches

1 - Black. Earth / Ground (earth on harness)

2 - Red. Normally connected to dash light circuit to be on when your dash lights are on

2 - Red. Connect to your relay or accessories (relay on harness)

3 - Red. Connect from your source with an inline (high beam on harness)